Manufacturer for Stainless Pop Rivets - Aluminium with Aluminum Mandrel Open Type Blind Rivet – Fixpal Detail:
Material
Body | Aluminum(5050 5052 5056 5154) | (AL Mg 1%-1.5%, 2%-2.5% ,3%-3.5%,5%) | ||
Finish | Polished | RAL Colour Painted | ||
Mandrel | Aluminum ● | Steel | Stainless Steel | |
Finish | Polished ● | Zinc Plated | Polished | |
Head Type | Dome, CSK, Large Flange |
Specification
D1 NOM. |
DRILL NO. &HOLE SIZE |
ART.CODE | GRIP RANGE | L(MAX) | D NOM. |
K MAX. |
P MIN. |
SHEAR LBS |
TENSILE LBS |
||
INCH | MM | INCH | MM | ||||||||
3/32″ 2.4mm |
#41 2.5-2.6 |
AA32 | 0.020-0.125 | 0.5-3.2 | 0.250 | 6.4 | 0.188″ 4.8 |
0.032″ 0.81 |
1.00″ 25.4 |
70 310N |
80 360 N |
AA34 | 0.126-0.250 | 3.2-6.4 | 0.375 | 9.5 | |||||||
AA36 | 0.251-0.375 | 6.4-9.5 | 0.500 | 12.7 | |||||||
1/8″ 3.2mm |
#30 3.3-3.4 |
AA41 | 0.020-0.062 | 0.5-1.6 | 0.212 | 5.4 | 0.250″ 6.4 |
0.040″ 1.02 |
1.06″ 27 |
120 530 N |
150 670 N |
AA42 | 0.063-0.125 | 1.6-3.2 | 0.275 | 7.0 | |||||||
AA43 | 0.126-0.187 | 3.2-4.8 | 0.337 | 8.6 | |||||||
AA44 | 0.188-0.250 | 4.8-6.4 | 0.400 | 10.2 | |||||||
AA45 | 0.251-0.312 | 6.4-7.9 | 0.462 | 11.7 | |||||||
AA46 | 0.313-0.375 | 7.9-9.5 | 0.525 | 13.3 | |||||||
AA48 | 0.376-0.500 | 9.5-12.7 | 0.650 | 16.5 | |||||||
AA410 | 0.501-0.625 | 12.7-15.9 | 0.775 | 19.7 | |||||||
5/32″ 4.0mm |
#20 4.1-4.2 |
AA52 | 0.020-0.125 | 0.5-3.2 | 0.300 | 7.6 | 0.312″ 7.9 |
0.050″ 1.27 |
1.06″ 27 |
190 850 N |
230 1020 N |
AA53 | 0.126-0.187 | 3.2-4.8 | 0.362 | 9.2 | |||||||
AA54 | 0.188-0.250 | 4.8-6.4 | 0.425 | 10.8 | |||||||
AA56 | 0.251-0.375 | 6.4-9.5 | 0.550 | 14.0 | |||||||
AA58 | 0.376-0.500 | 9.5-12.7 | 0.675 | 17.1 | |||||||
AA510 | 0.501-0.625 | 12.7-15.9 | 0.800 | 20.3 | |||||||
AA516 | 0.876-1.000 | 22.2-25.4 | 1.175 | 29.8 | |||||||
3/16″ 4.8mm |
#11 4.9-5.0 |
AA62 | 0.020-0.125 | 0.5-3.2 | 0.325 | 8.3 | 0.375″ 9.5 |
0.060″ 1.52 |
1.06″ 27 |
260 1160 N |
320 1430 N |
AA63 | 0.126-0.187 | 3.2-4.8 | 0.387 | 9.8 | |||||||
AA64 | 0.188-0.250 | 4.8-6.4 | 0.450 | 11.4 | |||||||
AA66 | 0.251-0.375 | 6.4-9.5 | 0.575 | 14.6 | |||||||
AA68 | 0.376-0.500 | 9.5-12.7 | 0.700 | 17.8 | |||||||
AA610 | 0.501-0.625 | 12.7-15.9 | 0.825 | 21.0 | |||||||
AA612 | 0.626-.0750 | 15.9-19.1 | 0.950 | 24.1 | |||||||
AA614 | 0.751-0.875 | 19.1-22.2 | 1.075 | 27.3 | |||||||
AA616 | 0.875-1.000 | 22.2-25.4 | 1.200 | 30.5 | |||||||
AA618 | 1.001-1.125 | 25.4-28.6 | 1.325 | 33.7 | |||||||
AA620 | 1.126-1.250 | 28.6-31.8 | 1.450 | 36.8 | |||||||
1/4″ 6.4mm |
F 6.5-6.6 |
AA82 | 0.020-0.125 | 0.5-3.2 | 0.375 | 9.5 | 0.500″ 12.7 |
0.080″ 2.03 |
1.25″ 32 |
460 2050 N |
560 2500N |
AA84 | 0.126-0.250 | 3.2-6.4 | 0.500 | 12.7 | |||||||
AA86 | 0.251-0.375 | 6.4-9.5 | 0.625 | 15.9 | |||||||
AA88 | 0.376-0.500 | 9.5-12.7 | 0.750 | 19.1 | |||||||
AA810 | 0.501-0.625 | 12.7-15.9 | 0.875 | 22.2 | |||||||
AA812 | 0.626-0.750 | 15.9-19.1 | 1.000 | 25.4 | |||||||
AA814 | 0.751-0.875 | 19.1-22.2 | 1.125 | 28.6 | |||||||
AA816 | 0.876-1.000 | 22.2-25.4 | 1.250 | 31.8 | |||||||
AA818 | 1.001-1.125 | 25.4-28.6 | 1.375 | 34.9 |
Application
Our full aluminum open end rivet uses high quality aluminum alloy wires. After the riveting, It will never rust. compared with ordinary rivets, the rivet intensity is low, so it is suitable for connected the soft material.Aluminum pop rivets can be divided into a dome head rivet,countersunk rivets and large flange head rivet.And the aluminum alloy material have multi choice of alu mg 2% 2.5% 3.5% and 5%(5052 5154 5056).
Fixpal open type pop rivets have the advantages of easy operation, excellent riveting, beautiful appearance, high physical properties. Perfect choice of single -sided riveting.Aluminum pop rivets can be widely used in various vehicles, vessels, machinery manufacturing, electronics, instrumentation, food machinery, medical equipment, construction, decoration and other fastening areas.
The problems and reasons when using the blind rivet:
1. Burrs: After riveting, the breaked mandrel with burrs pass through the rivet holes; or the riveting holes protrudes from the outside to form a spatula burr.
The cause of the burrs: the diameter of the mandrel is small; the rivet material is soft; the drilling hole diameter of the workpiece is too large; the muzzle specifications of the rivet gun are too large;
2. The nail head falls off: After the rivet is pulled, the core rivet head cannot be wrapped and falls off from the rivet.
The reasons for falling the rivet head of the core are: the diameter of the nail cap is too large; the rivet is shorter, and the rivet thickness does not match.
3. the rivet cracking: After the riveting, the rivet is pulsed or completely ruptured.
The reasons for the cracking of the rivet are: excessive hardness after riveting annealing or unheated treatment, the nail core hat is too large.
Product detail pictures:
Related Product Guide:
Quality to start with, Honesty as base, Sincere company and mutual profit is our idea, as a way to build constantly and pursue the excellence for Manufacturer for Stainless Pop Rivets - Aluminium with Aluminum Mandrel Open Type Blind Rivet – Fixpal, The product will supply to all over the world, such as: Eindhoven, Greenland, Cairo, Please feel cost-free to send us your specifications and we'll respond to you asap. We've got a professional engineering team to serve for the every single detailed needs. Free samples may be sent for you personally to know far more facts. So that you can meet your desires, please really feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
By Camille from Armenia - 2017.12.02 14:11
Production management mechanism is completed, quality is guaranteed, high credibility and service let the cooperation is easy, perfect!
By Lena from Dubai - 2017.05.02 18:28