Manufacturer for Hex Rivet Nut - Thin Head (Reduced Head) Hex Body Open End Rivet Nut with Knurls – Fixpal Detail:
Material
| Material | Aluminum | Steel | Stainless Steel |
| Finish | Polished | Zine Plated | Polished |
Specification
| CODE | Size d |
Grip Range e |
Length h |
M。 +0.15 +0.05 |
M -0.03 -0.2 |
dk +0.3 -0.3 |
K +0.2 -0.2 |
L +0.3 -0.3 |
| FM4H | M4 | 0.5～2.0 | 6.0 | 6 | 6 | 9 | 0.8 | 10.8 |
| FM5H | M5 | 0.5～2.5 | 8.0 | 7 | 7 | 10 | 1.0 | 13.0 |
| FM6H | M6 | 0.5～3.0 | 9.0 | 9 | 9 | 13 | 1.5 | 15.8 |
| FM8H | M8 | 0.5～3.5 | 11.0 | 11 | 11 | 15 | 1.5 | 18.0 |
| FM10H | M10 | 0.5～3.5 | 12.5 | 12 | 12 | 17 | 1.8 | 20.3 |
| FM10H(13) | M10 | 0.5～3.5 | 12.5 | 13 | 13 | 17 | 1.8 | 20.3 |
| FM12H | M12 | 0.5～3.5 | 16.0 | 15 | 15 | 19 | 1.8 | 24.3 |
Application
The rivet nut is used to pull riveting with a riveting gun. Then it is suitable for places that are not easy to riven like a square tube. The rivet nut also makes up for some shortcomings of welding welding, such as aesthetic view, and there are places that are not easy to welded machines such as thin plates.
What are the advantages of rivet nuts?
1.High salt and mist, strong antiseptic, not easy to rust.
2.The outside of the product is bright, delicate, sharp and horizontal, flat end surface, and high size accuracy.
3.The riveting effect is good, the rivet does not tide, and the gun head is not stuck.
4.After riveting, rotate the torque and pull the torque.
5.The product stripes are full: no burrs, luster. Through the detection of control, the pull -up effect is good, and the lock screw does not deform.
6. The product has no impurities and the material composition is stable.
Detailed description of the usage of rivet nuts
How to use manual rivet nut tools: Insert the rivet nuts into the installation hole and fix the rivet nut.
1. Tort the rivet nut to the rivet tool
2. Use the rivet tool to insert the rivet nut into the drilling hole.
3.Tighten the nut, and press the ride on both sides of the rivet nut tool to press the direction of the round rod in the middle. It can only be pressed hard. Therefore, the pressure must be in place. In the form of tight thread.
4. Disclosure from the rivet tool with the pull -up nut: You only need to loosen the ball head in the figure. After completely loose, the tool will be separated from the nut. It is forbidden to pull out the rivet tool directly and destroy the thread inside the nut.
Product detail pictures:
Related Product Guide:
Always customer-oriented, and it's our ultimate target to be not only the most reliable, trustable and honest supplier, but also the partner for our customers for Manufacturer for Hex Rivet Nut - Thin Head (Reduced Head) Hex Body Open End Rivet Nut with Knurls – Fixpal, The product will supply to all over the world, such as: Cancun, US, Canada, Make sure you genuinely feel free to send us your requirements and we are going to respond for you asap. We now have got a skilled engineering group to serve for your just about every detailed needs. Cost-free samples could be sent to suit your needs personally to understand much more information. In an effort to meet your requires, be sure to seriously feel free to make contact with us. You may send us emails and contact us directly. Moreover, we welcome visits to our factory from around the globe for much better recognizing of our organization. nd objects. In our trade with merchants of numerous countries, we usually adhere for the principle of equality and mutual benefit. It is really our hope to market, by joint efforts, each trade and friendship to our mutual advantage. We look forward to getting your inquiries.
By Elva from California - 2017.11.12 12:31
The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
By Phyllis from Surabaya - 2018.10.01 14:14
