High Quality Open End Rivets - Aluminium with Aluminum Mandrel Open Type Blind Rivet – Fixpal

Material

Specification

Application

Our full aluminum open end rivet uses high quality aluminum alloy wires. After the riveting, It will never rust. compared with ordinary rivets, the rivet intensity is low, so it is suitable for connected the soft material.Aluminum pop rivets can be divided into a dome head rivet,countersunk rivets and large flange head rivet.And the aluminum alloy material have multi choice of alu mg 2% 2.5% 3.5% and 5%(5052 5154 5056).

Fixpal open type pop rivets have the advantages of easy operation, excellent riveting, beautiful appearance, high physical properties. Perfect choice of single -sided riveting.Aluminum pop rivets can be widely used in various vehicles, vessels, machinery manufacturing, electronics, instrumentation, food machinery, medical equipment, construction, decoration and other fastening areas.

The problems and reasons when using the blind rivet:
1. Burrs: After riveting, the breaked mandrel with burrs pass through the rivet holes; or the riveting holes protrudes from the outside to form a spatula burr.
The cause of the burrs: the diameter of the mandrel is small; the rivet material is soft; the drilling hole diameter of the workpiece is too large; the muzzle specifications of the rivet gun are too large;

2. The nail head falls off: After the rivet is pulled, the core rivet head cannot be wrapped and falls off from the rivet.
The reasons for falling the rivet head of the core are: the diameter of the nail cap is too large; the rivet is shorter, and the rivet thickness does not match.

3. the rivet cracking: After the riveting, the rivet is pulsed or completely ruptured.
The reasons for the cracking of the rivet are: excessive hardness after riveting annealing or unheated treatment, the nail core hat is too large.