High definition Steel Rivet Nut - Flat Head Hex Body Closed End Rivet Nut – Fixpal

Material

Specification

Application

The basic use of stainless steel rivet nuts is the same as carbon steel rivet nuts. However, it is mainly used for non -structural carriers of loading capacity, such as rail bus, highway bus, ships and other decoration parts. The improved rivet nut is better than the aircraft tray nut. The advantage is that the weight is lighter. There is no need to fix the tray nut at the rivet. There is no operating space on the back of the substrate.

The stainless steel rivet nut was twisted too tightly, and the interface is rusty, which is not conducive to disassembly. When the nut is screwed, it is recommended to twist it with your hand, twist it with a wrench half a circle to a circle. When installing the car tire, the screw cannot be twisted too tightly, otherwise the screw may be deformed and affects the fixed effect. On the same tire, the degree of loosening of each screw must also be average and cannot be tightened alone. Otherwise, it will affect the driving of the tire, and it may break the screw due to unevenness in severe strength.

The stainless steel riveting steel rivet must be installed outside, but the internal space is small, the head of the riveting machine cannot enter the rivet, germination and other methods cannot meet the strength requirements, then riveting and riveting are not feasible.

The stainless steel rivet nut can riven on a single thin plate or riven two plates. They are both rivets and nuts. They are also suitable for only single parts. In addition, for light metal material workpieces that need to be connected to the thread, stainless steel riveting nuts are tight and convenient nuts.

The stainless steel riveting nut deforms when the axial pressure is applied at both ends, and the stress is better than the expansion shape of the radial pressure in simple parts and tube. After the stainless steel rivet is riveted, the length is shortened, and its contraction is related to the plasticity and size of the material. In order to prevent the expansion coefficient from exceeding the allowable value and the expansion to form a crack, the contraction must be controlled.

What are the advantages of rivet nuts?
1. High salt and mist, strong antiseptic, not easy to rust.
2. The outside of the product is bright, delicate, sharp and horizontal, flat end surface, and high size accuracy.
3. The riveting effect is good, the rivet does not tide, and the gun head is not stuck.
4. After riveting, rotate the torque and pull the torque.
5. The product stripes are full: no burrs, luster. Through the detection of control, the pull -up effect is good, and the lock screw does not deform.
6. The product has no impurities and the material composition is stable.

Interlock rivets and outerLock rivets differences are as follows:
Monobolt is a major of most structural Rivets, it has a double locking function and role of the closure, after riveting lock mandrel to form a high tensile shear strength of the rivet body inside.monobolt rivets ,rivet body material of aluminum, steel and stainless steel products are mainly used in aviation manufacturing industry. Monobolt including inner and outer lock rivets.monobolt rivets, also known as cup-type blind rivets, blind rivets structural belong, after the rivet mandrel breakage at will into the rivet body flange within the recess, the locking nail heart.

Interlock rivets and outer Lock from the surface not too much different, mechanical properties are basically the same, the main structure is different locking rivet after the general conditions in the conventional ,innerlock rivets common rivet gun can be used, outer Lock It requires matching the corresponding rivet rivet gun.