Material
| Material | Aluminum | Steel | Stainless Steel |
| Finish | Polished | Zine Plated | Polished |
Specification
| CODE | Size d |
Grap Range e |
Length h |
D。 +0.15 +0.05 |
D -0.03 -0.2 |
dk +0.30 -0.30 |
k +0.20 -0.20 |
L +0.30 -0. |
|
| CM3 | CM3R | M3 | 1.6～3.0 | 5.0 | 5 | 5 | 7.8 | 1.5 | 9.5 |
| CM4 | CM4R | M4 | 1.6～3.5 | 6.0 | 6 | 6 | 9.0 | 1.5 | 11.0 |
| CM5 | CM5R | M5 | 1.6～3.5 | 8.0 | 7 | 7 | 10.0 | 1.5 | 14.0 |
| CM6 | CM6R | M6 | 1.6～4.0 | 9.0 | 9 | 9 | 12.0 | 1.5 | 15.0 |
| CM8 | CM8R | M8 | 1.6～4.5 | 10.0 | 11 | 11 | 14.0 | 1.5 | 16.5 |
| CM10 | CM10R | M10 | 1.8～4.5 | 11.0 | 13 | 13 | 16.0 | 1.7 | 19 |
| CM12 | CM12R | M12 | 1.9～5.0 | 13.5 | 15 | 15 | 18.0 | 1.8 | 22.5 |
Application
The rivet nut is one of the fasteners. Most of the new fasteners are used on the thin sheet, which is used for the fastening areas of various types of sheet metal manufacturing industries. It has a suitable internal thread, and then the screw can be achieved.
What are the uses of rivet nuts?
When the space inside the product is small and the nut needs to be installed outside, the riveting machine cannot be riveted. At this time, the rivet and rising rivets are not good. The rivet nut is suitable for the fastening field of various plates, and the riveting with rivet guns can make up for the lack of welding nuts.
What is the installation method of rivet nuts?
Precautions for riveting insert nut
1. See if the rifle screw is equipped with the correct rivet nut standard to select the corresponding gun head and pull rivet bolts, and the connection parts are reliable.
2. Pay attention to the deformation length or displacement of the blind rivet nut, and then correctly adjust the operating rod tension.
3. The scale ring of the rivet gun is used to condition the riveting stroke. It can be adjusted according to the needs during operation. It is worth noting that when conditioning the length of the riveting bolt, you need to open the two handles and adjust the gun head sleeve. The length of the rivet bolt is slightly greater than the length of the rivet nut. In the end, the conditioning nut and gun body are tightly tightened.
4. Finally, open the two hands and pull the rubber wood all out, put the corresponding rivet nut on the end of the rivet bolt and pinch, and push the glue wood to spin the head bolt, and then pierce the rivet nut into the rivet. Then press the handle force again. At this moment, the rivet swelling general workpiece riven, and then pull out the rubber ball. You can complete the device of the riveting nut.
