2022 High quality Threaded Rivet Nuts - Thin Head (Reduced Head) Hex Body Open End Rivet Nut with Knurls – Fixpal

Material

Specification

Application

The rivet nut is used to pull riveting with a riveting gun. Then it is suitable for places that are not easy to riven like a square tube. The rivet nut also makes up for some shortcomings of welding welding, such as aesthetic view, and there are places that are not easy to welded machines such as thin plates.

What are the advantages of rivet nuts?
1.High salt and mist, strong antiseptic, not easy to rust.
2.The outside of the product is bright, delicate, sharp and horizontal, flat end surface, and high size accuracy.
3.The riveting effect is good, the rivet does not tide, and the gun head is not stuck.
4.After riveting, rotate the torque and pull the torque.
5.The product stripes are full: no burrs, luster. Through the detection of control, the pull -up effect is good, and the lock screw does not deform.
6. The product has no impurities and the material composition is stable.

Detailed description of the usage of rivet nuts

How to use manual rivet nut tools: Insert the rivet nuts into the installation hole and fix the rivet nut.
1. Tort the rivet nut to the rivet tool
2. Use the rivet tool to insert the rivet nut into the drilling hole.
3.Tighten the nut, and press the ride on both sides of the rivet nut tool to press the direction of the round rod in the middle. It can only be pressed hard. Therefore, the pressure must be in place. In the form of tight thread.
4. Disclosure from the rivet tool with the pull -up nut: You only need to loosen the ball head in the figure. After completely loose, the tool will be separated from the nut. It is forbidden to pull out the rivet tool directly and destroy the thread inside the nut.